Warn Service Parts home page Select your winch type from the buttons to your right Parts list for Warn self recovery winches Parts list for Warn CE (European Standards) self recovery winches Parts lists for Warn ATV winches Parts lists for Warn industrial winches and hoists
When ordering genuine Warn replacement parts, you'll need to know the model number, battery voltage and serial number for your winch. On planetary gear models the serial number can be found on the gear end housing. On upright, spur gear models (M8274), look on the top of the winch housing.

About our exploded view image map catalog system: Hovering your mouse cursor over the item number of a part will show the name and a description of the part as well as the part number (may not work in all browsers).  Clicking on it will add the item to your shopping cart.

In some cases, two versions of a part may be available, such as a 12V or 24V option.  In these cases, the second option description is shown inside ( ) parenthesis along with the phrase "call us to order."  Clicking on the item number will add the first option part to your shopping cart. If you want to order the part option in the parenthesis instead, please call us. 

Some items which appear on the exploded views are not currently listed in the catalog - call us for information if the part you want is not currently catalogued. 

9.5ti 9,500 lb. Multi-Mount Winch

This page covers P/N 65735, Serial numbers 81220 and up

If the part you need is not linked below, or clicking a link does not put
the item in your shopping cart, please call us for ordering information.

*WARN WIRELESS CONTROL SYSTEM
CONTROL YOUR WINCH WITH NO STRINGS (OR WIRES) ATTACHED.

The WARN Wireless Control System lets you
operate your truck's winch remotely from
up to 100' away. The system will work with
any WARN winch with a 5-wire electrical
system.

The system is easy to install and a cinch to use. For
easy installation, the Wireless Control System comes
with a receiver with an internal antenna, and all of the
necessary mounting hardware. The receiver is potted for
extreme resistance to water and the elements. The
weather-proof transmitter has two large buttons that make it
easy to operate, even while wearing gloves, and its two-color LED provides operator feedback.

When installed, the system is simple to operate. To begin activation, hold down both buttons on the transmitter for five seconds until the two-color LED turns green. This indicates the system has been activated. To begin the winching process, hold down the power-in or power-out buttons, and the LED will turn red, showing that winching is in process. The LED will blink if the transmitter's battery is low. System automatically turns off to conserve battery life.

With the WARN Wireless Control System, you can now operate your winch with no strings (or wires) attached.

PN 76080 Wireless Control System for WARN Truck/SUV winches

Not Shown:

Label Kit
Solenoids
Clutch Lever Detent Screw
Quad-X Seal
Seal Retainer Washer
Thrust Plate
Sliding Ring Gear
Bushing

 

Home page
Winch Parts
View Cart
Return Policy
Company Info
Comments

Warn Service Parts, a division of Redding Four Wheel Drive, Inc.
850 Commerce Street    Redding, CA 96002       Phone: 530-221-0581      Toll Free: 877-223-8906

Be sure to visit our other sites:
Winch Central: http://www.winchcentral.com 
Grille Guard Central: http://www.grilleguardcentral.com
Redding Four Wheel Drive, Inc: http://www.redding4x4.com
Modern Pioneering: http://www.mpioneer.com

 

Wireless Control P.N. 76080 TPSCR-5/16-18X2.25-HEX SOCKET P/N 64405 CPSCR,SOC,10-24 X 3/4,GR9 P/N 5553 HOUSING,GASKET P/N 13848 CABLE,ELEC,2GA,RED,72 P/N 33295 (MTO) S/P,COVER,CONTROL ASSY, P/N 64637 S/P,SOCKET PLUG ASSY,9.5 Ti P/N 64639 (MTO)S/P,COVER MOTOR,9.5 Ti P/N 64640 CPSCR,SOC,10-24 X 3/4,GR9 P/N 5553 (MTO)TERMINAL KIT,5/16 WR P/N 16463 (MTO)S/P WIREROPE ASSY5/16-125 P/N 38312 (MTO)S/P,REMOTE CONTROL,9.5 Ti P/N 72566 FAIRLEAD,ROLLER P/N 5742 Vertical Shaft P/N 5744 Retaining Ring P/N 6126 Horizontal Roller w/Bushings, P/N 69904 Horizontal Shaft P/N 5745 Retaining Ring P/N 6126 Bracket P/N 5741, Not currently catalogued, please call us to order. Seal kit (includes 11, 12, 20 & 21) P/N 64642 (MTO)S/P,END HSG ASSY,9.5 Ti (includes thrust plate, ring gear, sliding bushing, #2 and #4) P/N 64631 (MTO)S/P,CLUTCH LEVER,9.5 Ti (includes clutch lever detent screw, seal, quad-x, wahser, seal retainer) P/N 64641 WASHER,THRUST,NYLON,MIDRANGE P/N 13826 HOUSING,GASKET P/N 13848 CPSCR,SOC,10-24 X 2.25 (10) P/N 13850 S/P,DRUM SUPPORT GEAR,9.5Ti P/N 64632 RING GEAR,ARG,75 TOOTH P/N 25308 CARRIER ASSY, STAGE 2 P/N 34342 CARRIER ASSY, STAGE 3 P/N 28432 S/P, BRAKE ASSY, 9.5 Ti (includes items # 14, 15, 16) P/N 64633SUN GEAR, 18T, .50 HEX P/N WAR39479 DRIVE SHAFT, 11.47x.50, W/GROOVE & RETAINING RING, P/N 39481 (MTO) S/P SPLINED DRIVE, W/RETAINING RING, P/N 14584 COUPLER,MOTOR,12TOOTH P/N 39480 DRUM ASSY,2.5 X 9.0 P/N 26107 S/P, DRUM SUPPORT MTR, 9.5 Ti (INCLUDES #18A GASKET) P/N 64634 CARRIER ASSY, STAGE 1 P/N 28430 (MTO)S/P,MOTOR, BIC, W/TPD,12V (INCLUDES ITEMS # 18A, 25, 26, 27) P/N 64635 TPSCR-5/16-18X2.25-HEX SOCKET P/N 64405 CABLE,ELEC,2GA,BLK,72 P/N 15901 S/P, CONTROL ASSY, 9.5TI P/N WAR64636 1 Roller and 2 Bushings, P/N WAR69903 Hook, 3/8, Safety, P/N WAR63979 Nut, M8 X 1.25 Hex, P/N WAR13455 Motor Gasket, not currently catalogued, please call us to order. CPSCR, M8x1.25 x 12-HEX HEAD, P/N WAR26744 WASHER, 5/16-HELICAL P/N WAR1402 Not currently catalogued, please call us to order!